A COPY OF THE TONEX SOFTWARE IS REQUIRED TO USE THESE PRESETS
 
This tone model bundle is a collection of tones based off a Two-Rock Studio Signature amplifier with its gain structure switch in the DOWN position. This bundle is a set of captures based off my favorite settings on the amp meticulously captured through a 1x12 Two-Rock CB speaker cab.

This bundles tone models capture an array of different gain and channel settings. The bundle includes 16 amp/cab tone models (amp > mic > mic pre) and 16 DI tone models all at various gain levels and settings through the previously mentioned speaker. The DI tone models included a baked in custom IR based off the same 1x12 Two-Rock CB speaker cab. To use the DI tone model with a different IR or cab simply change cabs or disable the cab block.

The naming convention for the tone presets are, for example, as follows:

JS – 2 Stone x Down (B, M, D)

The single “x” signifies the level of gain with 1 being clean, 2 being more overdriven and 3 the highest level of gain. If the name contains a “B”, the “Bright” toggle switch was engaged. If the name contains an “M”, the “Mid” toggle switch was engaged. If the name contains a “D”, the “Deep” toggle switch was engaged. At times, none, some or all switches can be engaged, and the tone models name will denote which ones are active. If the name contains a DI it is a “Direct” tone model.

The tone models were recorded with a Royer R10 ribbon mic into a Cranborne Camden 500 preamp.

Feel free to use these captures and presets as starting points to dial in your own tones or use them as dialed in by default.