A COPY OF THE TONEX SOFTWARE IS REQUIRED TO USE THESE PRESETS
 
This tone model bundle is a collection of tones based off a Boogie California Tweed 6v6 2:20 amplifier. This bundle is a set of amp+cab captures based off my favorite settings on the amp meticulously captured through the combos 12” Jensen Blackbird Alnico 40 speaker.

This bundles tone models an array of different gain, channel and wattage settings. The bundle includes 12 tone models (amp > mic > mic pre) all at various gain levels and settings through the previously mentioned speaker.
 
The naming convention for the tone presets are, for example, as follows:

JS – C-Tweed (1W or 20W) x (L or N)

The “1W” or “20W” signifies if the tone model was captured at the amps 1 Watt or 20 Watt setting. The “L” or “N” signifies whether the tone model was captured using the Low or Normal input/channel. The “x” in the above naming convention represents the following gain levels:

1. 1 – Amp set to as clean or maybe slight edge of breakup depending on the guitar used.
2. 2 – This is a pushed to breakup amp tone.
3. 3 – This is a higher gain tone model in comparison to 2 and is about as high gain as this amp can get.

The microphone was recorded with a Beyer Dynamic M160 ribbon mic into a Cranborne Camden 500 preamp.

Feel free to use these captures and presets as starting points to dial in your own tones or use them as dialed in by default.