A COPY OF THE TONEX SOFTWARE IS REQUIRED TO USE THESE PRESETS
 
This tone model bundle is a collection of tones based off a ’65 Fender Deluxe Reverb re-issue tube amplifier. This bundle is a set of captures based off my favorite settings on the amp meticulously captured through 2 different speaker types: the built in Jensen C-12K and Vintage 30s.
 
This bundles tone models model an array of different gain settings. The bundle includes 16 tone models (amp > mic > mic pre) all at various gain levels and settings through the previously mentioned speakers.
 
The naming convention for the tone presets are, for example, as follows:

JS – Dlx Ult xxx xxxx (Jensen or V30)

The “V30” signifies Vintage 30 speakers, “Jensen” signifies the Jensen C-12K speaker. The “xxx” represents which amplifier input was used, Normal or Vibrato. The “xxxx” in the above naming convention represents the following tone models:
1. Clean – Amp set to as clean as it can be.
2. Push 1 – This is a pushed to breakup amp tone.
3. Push 2 – This is a higher gain tone model in comparison to Push 1. Often this was captured with the amps volume maxed out on 10.
4. Lead - This is a higher gain tone model in comparison to Push 3. This features the amp pushed into more saturation with a Dumble style overdrive pedal.

The microphones were recorded into a Warm Audio WA-273 Neve style mic-pre/eq.

Feel free to use these captures and presets as starting points to dial in your own tones or use them as dialed in by default.