A COPY OF THE TONEX SOFTWARE IS REQUIRED TO USE THESE PRESETS
 
This tone model bundle is a collection of tones based off a Suhr SL67 “Plexi” amplifier. This bundle is a set of captures based off my favorite settings on the amp meticulously captured through a pair of 12” Celestion Vintage 30 speakers.
 
This bundles tones model an array of different gain and channel settings. The bundle includes 10 amp/cab tone models (amp > mic > mic pre) all at various gain levels and settings through the previously mentioned speakers. The naming convention for the tone presets are, for example, as follows:
 
JS – Sir Plex-I-Lot xxxx x (H or L)
 
The xxxx signifies the overall level of gain in the tone model from Clean to Push to OD. The single “x” signifies the level of gain within the previous mentioned overall level of gain. If the name contains an (H) it signifies the “Hi” channel of the amp was used and if the name contains an “L” it means the “Low” channel of the amp was used. The “Low” channel is a lower voltage channel and gives a different overall feel, having a more “spongey” feel with a smoother attack.
 
Clean – Amp set to as clean as it can be.
Push 1 – This is a pushed to breakup amp tone.
Push 2 – This is a higher gain tone model in comparison to Push 1.
OD 1 – This is a higher gain tone model in comparison to Push 2.
OD 2 - This is a higher gain tone model in comparison to OD 1.
 
The tone models were recorded with a Royer R10 ribbon mic into a Cranborne Camden 500 mic preamp for the amp/cab captures.
 
Feel free to use these captures and presets as starting points to dial in your own tones or use them as dialed in by default.